YSI MIQ/Blue PS Set - Manual (Page 31)

MIQ/Blue PS Installation
3 - 21 ba76095e02 01/2013
Fig. 3-14 Prepared 24 V DC line.
Connecting the 24 V DC
line
Fig. 3-15 Inserting the 24 V DC line.
ca. 45 mm
wire 1
wire 2
4 Open the enclosure.
5 Screw a cable gland (pos. 1 in Fig. 3-15) with sealing ring (pos.
2) into the enclosure below the 24 V DC connection.
6 Loosen the coupling ring (pos. 3).
7 Feed the 24 V DC line through the cable gland into the enclo-
sure. When doing so bend the flexible divider (pos. 4) to the
left.
1
3
2
4
-
+