YSI IQ S ENSOR N ET TriOxmatic 701 IQ - Manual (Page 54)

Indexes TriOxmatic
®
701 IQ
9 - 2 ba76047e01 01/2012
9.1.2 Info messages
EI1332 Operational voltage too low
* Check installation and cable lengths, Follow installation instructions
* Power unit(s) overloaded, add power unit(s)
* Check terminal and module connections
* Defective components, replace components
EI2332 Operational voltage too low, no operation possible
* Check installation and cable lengths, Follow installation instructions
* Power unit(s) overloaded, add power unit(s)
* Check terminal and module connections
* Defective components,
replace components
ES1332 Component hardware defective
* Contact service
ESB332 SensReg: Electrolyte supply is depleted
* Change electrolyte solution and membrane head immediately (see
operating manual)
ESC332 SensLeck: Membrane head damaged
* Change electrolyte solution and membrane head immediately (see
operating manual)
Message code Message text
Message code Message text
IC1332 Sensor has been successfully calibrated
* For calibration data, see calibration history
IC4332 Last valid calibration has been activated. Make sure the sensor
operates correctly.
II1332 Language not available,
Default language German
* Contact service