YSI IQ SensorNet TetraCon Sensor 700 IQ (SW) - Manual (Page 9)

TetraCon
®
700 IQ (SW) Safety
2 - 3 ba76018e01 01/2012
Safe operation If safe operation is no longer possible, the sensor must be taken out of
operation and secured against inadvertent operation.
Safe operation is no longer possible if the sensor:
 has been damaged in transport
 has been stored under adverse conditions for a lengthy period of
time
 is visibly damaged
 no longer operates as described in this manual.
If you are in any doubt, contact the supplier of your sensor.
Obligations of the
operator
The operator of the sensor must ensure that the following rules and
regulations are followed when dealing with hazardous substances:
 EEC directives for protective labor legislation
 National protective labor legislation
 Safety regulations
 Safety data sheets of the chemical manufacturer.