YSI IQ SensorNet SensoLyt Sensor 700 IQ (SW) User Manual
Page 13
Advertising
SensoLyt
®
700 IQ (SW)
Commissioning
3 - 3
ba76006e01
01/2012
3.3
Commissioning / Getting the instrument ready for
measuring
Note
A KCI-filled plastic cap is mounted on the tip of the sensor to keep the
combination electrode active during storage (or during longer pauses
in measuring). The cap must be removed for measuring.
Mounting the
combination electrode
1
Unscrew the protective hood from the sensor.
2
Pull off the blind plug from the plug head socket of the sensor.
3
Screw off the protective cap of the plug head connector of the
combination electrode.
Advertising