YSI IQ SensorNet SensoLyt Sensor 700 IQ (SW) - Manual (Page 28)

Maintenance and changing the electrode SensoLyt
®
700 IQ (SW)
5 - 2 ba76006e01 01/2012
5.2 Replacing the combination electrode
If it is necessary to replace the combination electrode, proceed as
follows:
1 Unscrew the protective hood from the sensor.
2 Use the protective hood as a tool to lever out the combination
electrode.
3 Carefully pull out the combination electrode until the plug head
screwed fitting can be seen.