8 reset, 1 resetting the system settings, 2 resetting the photometry settings – YSI pHotoFlex STD Colorimeter User Manual
Page 55: Reset 4.8.1, Resetting the system settings, Resetting the photometry settings, Section 4.8.1
Advertising
pHotoFlex
®
STD
Operation
55
ba76122e01
02/2013
4.8
Reset
You can reset (initialize) all system and measurement settings.
4.8.1
Resetting the system settings
With the System / Reset function, all resettable settings are reset.
Settings for Photometry (see section 4.8.2)
System settings
4.8.2
Resetting the photometry settings
With the Photometry / Reset function, all photometry settings are reset.
System setting
Default settings
Baud rate
4800 Baud
Output format
ASCII
Illumination
Auto off
Contrast
50 %
Brightness
50 %
Switchoff time
30 min
Beep
On
Setting
Default settings
PROG
0
Cell size
16 mm
Meas. param.
Concentration
Wavelength
436 nm
Blank values
all erased
Advertising