YSI ProOBOD - Manual (Page 2)

Item #626471
Rev B
Drawing # A626471
September 2010
©2010 YSI Incorporated.
The YSI, ProODO, OBOD and ODO logos are
registered trademarks of YSI Incorporated.
C O N T E N T S
Warranty ..............................................................................................................i
Introduction ....................................................................................................... 1
Getting Started ................................................................................................... 2
Unpacking the OBOD Probe ............................................................. 2
ProOBOD Operation ........................................................................................ 4
Connecting Probe/Cable Assembly to Instrument ......................... 4
Configuring the ProODO Instrument ............................................. 4
Powering the Stirrer ............................................................................ 5
Calibration - Dissolved Oxygen ........................................................ 5
Temperature......................................................................................... 7
Taking Measurements ......................................................................... 7
Maintenance and Storage .................................................................................. 8
Updating Instrument and Probe Firmware ...................................... 8
Sensor Maintenance - Dissolved Oxygen ......................................... 8
Sensor Maintenance - Temperature ................................................11
Sensor Storage ...................................................................................12
Troubleshooting ...............................................................................................12
Dissolved Oxygen Readings .............................................................12
Help ...................................................................................................13
Error/Status messages ......................................................................13
Restore Default Calibration Values ................................................14
Probe Specifications .........................................................................................15
Accessories / Parts List ....................................................................................16
Declaration of Conformity ..............................................................................17
Recycling ...........................................................................................................19
Contact Information ........................................................................................20
Ordering and Technical Support .....................................................20
Service Information ..........................................................................20
Appendix A-DO% Calibration Values ...........................................................21