2 connecting the power pack, 3 mounting the stand, Connecting the power pack – YSI TruLab 1310P User Manual
Page 12: Mounting the stand
Advertising
Commissioning
TruLab pH 1310
12
ba76156e01
03/2014
3.3.2 Connecting the power pack
3.3.3 Mounting the stand
The stand base can be mounted at the right side of the meter.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see section 13 T
CAUTION
Use original power packs only (see section 13 T
page 63).
1.
Connect the plug of the power pack to the socket for the power pack on
the TruLab pH 1310.
2.
Connect the original power pack to an easily accessible power outlet.
1
2
Advertising
This manual is related to the following products: