Xylem ECOCIRC XL, XLplus Electronic drive - Manual (Page 18)

6.2 Wireless Module
Referring to Figure 12 , once the module is connected,
is necessary to configure it by setting the parameter
“Module” to the value “Wireless”, as described in par.
4.3.5.2.
6.2.1 Wireless module use
When the wireless module is assembled into ecocirc
XLplus, and correctly configured, it generates a (type
902.11n) wireless network accessible (by a mobile,
tablet or a PC) using data (S/N and PWD) printed on
the label sticked on the side of the circulator’s drive
In particular,
 Network name: “ecocircxl___S/N___” where
S/N is a 8 character word
 Password: “xylem___PWD___” where PWD is
a 8 character word
To access then the circulator’s web pages using a
browser (on the external device connected), use the
web address “https://xylemecoxl” or type directly
“192.168.1.10”
6.3 RS485 Module
Referring to Figure 12 , once the module is connected,
is necessary to configure it by setting the parameter
“Module” to the value “RS485”, as described in par.
4.3.5.2