Xylem TURB 430 PORTABLE TURBIDITY METER - Manual (Page 22)

Operation Turb 430 IR/T
22 ba75507e03 07/2006
! Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. With <START/ENTER>, the selection of the
possible settings is opened. Subsequently, the setting can be
changed with <
▲> <▼> and<START/ENTER>.
Example:
! Functions
Functions are designated by the name of the function. They are
immediately carried out by confirming with <START/ENTER>.
Example: display the Calibration record function
(in the Turbidity menu).
! Messages
Information or operating instructions are designated by the
i
symbol. They cannot be selected.
Example:
Turbidity
System
Info
Configuration
Language : Deutsch
Beep : Off
Illumination : On
Contrast : 48 %
Temperature unit : °C
Switchoff time : 30 min
System
Calibration record
Calibration interval : 090 d
Reset
:
i 2.00 4.01 7.00 10.01
Turbidity