Html operation, Download the startup page – Extron Electronics DMP 64 User Guide User Manual
Page 126
HTML Operation
This section describes HTML operation and control of the DMP 64, including:
•
•
•
•
•
•
The DMP 64 can be controlled and operated through its Ethernet port, connected by
LAN or WAN, using a web browser such as the Microsoft
®
Internet Explorer. The browser
display of device status or operation has the appearance of web pages. This chapter
describes the factory-installed HTML pages, which are always available and cannot be
erased or overwritten.
NOTE: If the Ethernet connection to the device is unstable, try turning off the proxy
server in the Web browser. In Microsoft Internet Explorer, click
Tools > Internet Options > Connections > LAN Settings
, uncheck the
"Use a proxy server..."
box, and then click
OK
.
Download the Startup Page
Access the device using HTML pages as follows:
1.
Start the Web browser program.
2.
Click in the browser
Address
field.
3.
Enter the device IP address directly into the
Address
field.
NOTE: If the local system administrators have not changed the value, the
factory-specified default IP address is 192.168.254.254.
4.
If a custom display page is available, enter a slash (
/) and the file name to open.
NOTE: The browser
Address
field should display the address in the following
format: xxx.xxx.xxx.xxx/{
optional_file_name.HTML
}. The following
characters are invalid in file names:
{space}
+ ~ , @ = ‘ [ ] { } < > ’ " ; : > \ ?
DMP 64 • HTML Operation
120