Extron Electronics MTPX Plus Series User Guide - Manual (Page 116)

Serial-port- or USB-port-connected firmware upload
10
Figure 59. Extron Firmware Loader Window
10. Select the MTPX Plus switcher and click File > Open . The Choose Firmware File screen
appears (see figure 60).
11
11
Figure 60. Choose Firmware File Window
11. Navigate to and select the new firmware file. Click Open . The Choose Firmware File
window closes.
CAUTION: The firmware file must have an .s19 extension. Other file types can cause
the switcher to stop functioning.
NOTES: • When downloaded from the Extron website, the firmware is placed in a
subfolder of C:\Program Files\Extron\Firmware .
• The original factory-installed firmware is permanently available on the
matrix switcher. If the attempted firmware upload fails for any reason, the
switcher reverts to the factory-installed firmware.
MTPX Plus Series • Matrix Software 110