Extron Electronics MTPX Plus Series User Guide - Manual (Page 91)

Command/Response Table for SIS Commands (continued)
Command Function SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Audio input gain and attenuation
NOTE :
The set gain (G) and set attenuation (g) commands are case sensitive.
Set audio input gain to +dB value X! * X2) G In X! •Aud X2!]
Example: 1*2G In1•Aud+02 ] Set input 1 audio gain to +2 dB.
Set audio input attenuation to -dB
value X! * X2@ g In X! •Aud X2!]
Increment gain X! +G In X! •Aud X2!] Increase gain by 1 dB.
Example: 5+G In5•Aud+03 ] Increase audio input 5 level from +2 dB
to +3 dB.
Decrement gain X! -G In X! •Aud X2!] Decrease gain by 1 dB.
Example: 7-G In7•Aud-09 ] Decrease audio input 7 level from -8
dB to -9 dB.
Read input gain X! G X2!]
Example: 3G -06 ] Audio input 3 level is at -6 dB.
Audio or RS-232 mute commands
Audio or RS-232 mute X@ *1Z Amt X@ *1 ] Mute output X@ audio or RS-232
(audio off).
Audio or RS-232 unmute X@ *0Z Amt X@ *0 ] Unmute output X@ audio or RS-232
(audio on).
Read audio or RS-232 mute X@ Z X1#] 1 = mute on, 0 = mute off.
Global audio or RS-232 mute 1*Z Amt1 ] Mute all audio or RS-232 outputs.
Global audio or RS-232 unmute 0*Z Amt0 ] Unmute all audio or RS-232 outputs.
Names
NOTE :
The HTML language reserves certain characters for specific functions (see “ Special Characters “ on page 95).
Write global preset name EX2# , X2$ NG } Nmg X2# , X2$]
Example: E 1,Security 1NG }
Nmg01 , Security 1 ] Name global preset 1 “Security 1”.
Read global preset name EX2# NG } X2$]
Example: E 2NG } Security 2 ]
Write room preset name EX2% * X2# , X2$ NP } Nmp X2% * X2# , X2$]
Example: E 1*3 , Podium_DVDNP } Name room 1, preset 3 “Podium_DVD”.
Nmp01*3 , Podium_DVD ]
Read room preset name EX2% , X2# NP } X2$]
NOTES: • If a preset is unassigned, the X2$ displays [unassigned].
• If a global preset is saved, but not yet named, the default name is Preset X2# .
• If a room preset is saved, but not yet named, the default name is Rm X2% Prst X2# .
NOTE: X! = Input number 01 – (maximum number of inputs for your model)
X@ = Output number 01 – (maximum number of outputs for your model)
X* = Input number 01 – (maximum number of inputs for your model)
X1# = Mute 0 = off 1 = on
X2) = Audio gain 0 – 24 (1 dB/step)
X2! = Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X2@ = Audio attenuation 1 – 18 (1 dB/step)
X2# = Global or room preset # 01 - 32, 10 maximum for a room preset
X2$ = Name 11 characters for room preset names
X2% = Room # (for room presets) 10 max. (each can have up to 10 presets (X2#s) assigned)
MTPX Plus Series • Programming Guide 85