Extron Electronics MTPX Plus Series User Guide - Manual (Page 122)

EDID settings (MTPX Plus 128 only) — Displays the EDID Configuration window (see
figure 67), which allows you to set each input to a specific EDID value and to save the
output resolution to the user-configurable EDID slots.
NOTE: This selection is unavailable for switchers other than the MTPX Plus 128.
Figure 67. EDID Configuration window
Update Firmware ... — Allows you to replace the firmware that is coded on the control
board of the switcher without taking the switcher out of service (see “ Updating the
firmware ” on page 107).
IP options — Allows you to set IP options (see “ IP Settings/Options window ” on
page 103).
HTML file manager — Displays a list of HTML files installed on the switcher and allows
you to upload custom files from a PC connected to the switcher (see “ Uploading
HTML files ” on page 112).
MTPX Plus Series • Matrix Software 116