Extron Electronics PowerCage FOX SR HDMI User Guide - Manual (Page 16)

PowerCage FOX SR HDMI Scaling Receiver • Installation and Operation 10
PowerCage Front Panel Port, Control, and Indicators
The following features are on the front panel of the PowerCage enclosure (see figure 10).
PowerCage 1600
COMM
1
POWER
ALARM
2 3 14 15 16
1
PSU
2
PSU
1
FAN
2
FAN COMM
SELECT
CONFIG
TEMP
2 3 6 5 4 1
Figure 10. PowerCage Front Panel Features
a
Comm LED (16 board locations) — This LED lights to indicate that the board at this
location is selected for connection to the Configuration port ( item e ). Repeatedly press the
Comm Select button ( item d ) as necessary to select the desired board.
b
Power LED (all locations) — This LED lights to indicate that power is applied to the
device at this location.
c
Alarm LED (16 board locations) — This LED lights to indicate that light is not received
on the Rx connector of the board at this location.
Alarm LED (2 PS locations) — This LED lights to indicate that the power supply has
failed or is out of tolerance.
Alarm LED (2 Fan locations) — This LED lights to indicate that the fan has failed.
d
Comm Select button — Repeatedly press this button as necessary to select the receiver
for connection to the Configuration port ( item e ). The Comm LED ( item a ) for the receiver
lights.