Extron Electronics PowerCage FOX SR HDMI User Guide User Manual
Page 34
PowerCage FOX SR HDMI Scaling Receiver • Remote Control
28
6.
Navigate to and select the new firmware file. Click
Open
. The Choose Firmware File
window closes.
NOTE: When downloaded from the Extron website, the firmware is placed in a
subfolder of
C:
\
Program
Files
\
Extron
\
Firmware
.
ATTENTION: The firmware file must have a .S19 extension. Other file types can
cause the unit to stop functioning.
7.
In the Firmware Loader window, click
Begin
(see figure
23).
The Total Progress and Progress status bars show the progress of the upload. The
firmware upload to the unit may take several minutes. Once the status bars have
progressed from
0%
to
100%
, and Status is listed as
Completed
, the firmware loader
utility resets the unit.
7
Figure 23.
Firmware Loader Screen
8.
Click
Exit
to close the Firmware Loader.