Extron Electronics PowerCage FOX SR HDMI User Guide - Manual (Page 26)

PowerCage FOX SR HDMI Scaling Receiver • Remote Control 20
Signal Processing Product Control Program Control
The Extron Signal Processing Control Program, which communicates with the receiver via
its Remote RS-232 port or the PowerCage Configuration port, provides an easy way to
operate the receiver.
The program is compatible with Windows 2000, Windows XP®, or later. Updates to this
program can be downloaded from the Extron website (
www.extron.com ).
Installing the Software
The program is contained on a DVD. To install the software, insert the DVD into the drive.
The Extron software DVD window should appear automatically. If it does not self-start, run
Launch.exe from the DVD. Click the
Software tab, scroll to the desired program, and click
Install. Follow the instructions that appear on the screen. By default, the installation creates
a
C :\ Program Files [ Program Files (x86) for Windows 7]\ Extron \ Signal Processing
directory, and it places five icons into a group folder named “Extron Electronics\FOX
Extender Control Program.” The five installed icons are:
• Check for Signal Processing Updates
• Image Quick Capture
• Signal Processing Products Control Program Help
• Signal Processing Products Control Program
• Uninstall Signal Processing Products Control Program
Starting the Program
Start the Extron Signal Processing Product Control Program as follows:
1. Click Start > Programs > Extron Electronics > Signal Processing
> Signal Processing Product Control Program .
The Communication Setup window appears (see figure 12).
Figure 12. Communication Setup Window