Extron Electronics PowerCage FOX SR HDMI User Guide - Manual (Page 30)

PowerCage FOX SR HDMI Scaling Receiver • Remote Control 24
Advanced Functions area
The Executive Mode function is not available for the
PowerCage FOX SR HDMI.
Select the
Auto Memory checkbox to automatically apply saved
position settings when the sensed input resolution changes.
Aspect Ratio area
Select the Fill radio button to force the input to automatically fill the
output raster. Select the Follow radio button to display the input in its
native aspect ratio.
Enable/Disable/Daisy Chain Link #2 area
Select among the radio buttons in this area to define the function of the
Tx LC connector on the receiver:
• Enable — The connector routes RS-232 over fiber to the
transmitter.
• Disable — The connector has no function.
• Enable Daisy Chain — The connector routes the signal received on the Rx LC
connector to the next receiver in a daisy chain.
Video Shutdown Delay area
The Video Shutdown Delay setting delays the digital video to help
monitor sync correctly during an input rate change. Only video is
delayed; embedded audio is not delayed.