Imetec PROFESSIONAL SERIE HB 2000 - Manual (Page 17)

IT
11
ATTENTION!
• Do NOT, under any circumstance, touch and/or remove the blender stem
(5), chopper lid (8) (if present), or whisk (12) (if present) when the appliance
is in operation.
• Switch off the appliance and disconnect it from the mains power supply
before assembling or disassembling the blender stem (5), chopper lid (8)
(if present), or whisk (12) (if present). Carry out this operation at the end of
each use.
• Do NOT use the appliance when wearing loose clothing or long sleeves,
since they could get caught in the blender stem (5), chopper lid (8) (if present),
or whisk (12) (if present), when the machine is in operation.
• Failure to comply with these instructions and improper use of the appliance
can lead to injuries.
• Pay the utmost care when handling the blades of the blender (7) and chopper
(9) (if present) when cleaning the blade cover of the blender (6) or emptying
and cleaning the chopper bowl (10) (if present).
• Remove the protection from the chopper blades (9) (if present), before
using it.
SYMBOLS
Warning.
Prohibited.
Protection class II.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1. On/Off button (low speed).
2. On/Off button (turbo speed).
3. Motor unit.
4. Electric plug.
5. Blender stem.
6. Blades cover of the blender.
7. Blender blades.
8. Chopper lid.
9. Chopper blades.
10. Chopper bowl.
11. Whisk support.
12. Whisk.
13. Container.
GB
MI000877_multi.indd 11 4/10/12 3:10 pM