Physio-Control LIFEPAK 20e - Manual (Page 140)

Setup Options
8-4 LIFEPAK 20e Defibrillator/Monitor Operating Instructions
GENERAL SETUP MENU
The General Setup menu allows you to define general purpose settings. When you select a
menu item, the screen displays a help message. The underlined options are factory default
settings.
Table 8-1 General Setup Menu
Menu Item Help Message Options
LANGUAGE Language used for all
messages and prompts Options are: ENGLISH , FRENCH, GERMAN,
SPANISH, SWEDISH, ITALIAN, DUTCH,
FINNISH, DANISH, NORWEGIAN, POLISH,
PORTUGUESE,
BRAZILIAN, JAPANESE,
CHINESE MANDARIN, CZECH, RUSSIAN,
HUNGARIAN, and KOREAN .
CODE
SUMMARY CODE SUMMARY Format Options are: SHORT and MEDIUM (refer to
page 6-2 ).
SITE NUMBER Site ID Number Prints on reports. 0-9, A-Z available .
Maximum
25 digits.
DEVICE
NUMBER Defibrillator ID Number Prints on reports. 0-9, A-Z available.
Maximum
25 digits.
AUTO LOG Auto vital sign event capture
every 5 minutes ON : Vital sign data entered into event/vital
sign log every 5 minutes.
OFF : Vital sign entered only when events
occur.
LINE FILTER Line filter center frequency 50 or 60 HZ .
TIMEOUT
SPEED Delay before a menu is
dismissed Time that menus stay on screen ( 30 , 10 , or
5 SECONDS ). (Pacing and Transmit menus
are fixed at 30 seconds.)
AC LOSS ALERT A series of warning beeps if
the defibrillator is turned off
and not connected to AC
power. Options are: 5 , 15 , or 30 MINUTES , or
NEVER ALERT .
PREVIOUS
PAGE Go back to previous page.