Physio-Control LIFEPAK 20e - Manual (Page 39)

2
B
asic Orien
tation
Basic Orientation
LIFEPAK 20e Defibrillator/Monitor Operating Instructions 2-17
©2006-2013 Physio-Control, Inc.
SETTING ALARMS
Alarms for the LIFEPAK 20e defibrillator/monitor can be set to ON or OFF, and are enabled when
the monitor is turned on. When the alarms are set to ON , predetermined limits are set. To view
these limits, press the ALARMS button. The limits will appear to the right of the parameter value.
To change the limits, select QUICK SET .
Notes: Alarm limits are not displayed for Respiration Rate or Inspired CO
2
. Alarm limits are
provided in Table 2-1, page 2-19 .
Although alarm limits for Respiration Rate are not displayed, you can determine
whether wide or narrow limits are selected by pressing the
ALARMS button.
2 Rotate the Speed Dial to scroll
through the alphabet.
3 Press the Speed Dial to select the
desired character. The character
appears in the highlighted area.
4 Repeat Step 2 and Step 3 until the
name is complete.
5 Scroll and select END to return to the
Options/Patient screen as shown
previously.
There are three additional
commands:
• BACKSPACE – moves highlight
bar left one space
• CLEAR – clears all characters in
the name field
• SPACE – inserts a blank space
6 To exit, press the OPTIONS or HOME
SCREEN button.
To enter or edit a patient’s age:
1 Select AGE .
2 Rotate the Speed Dial to scroll to the
desired age.
3 Press the Speed Dial.
To enter or edit a patient’s sex:
1 Select SEX .
2 Rotate the Speed Dial to highlight
MALE or FEMALE .
3 Press the Speed Dial.