Xoro HMD 900 - Manual (Page 54)

16
Engl
ish
REMOTE CONTROL
Button discription of remote control
29
Press once to go to next chapter, press and hold to fast forward
playback when in DVD mode.
30
Angle Press to select different filming angle of DVD.
31
Audio/
LANG Press to change the audio language during playback. Press to
change the audio channel (Left, Right, Stereo during VCD and
CD playback. Press to switch the language in DVB-T mode.
Notes:
1.
Please pull out the PVC tab before using the remote control unit for the first time.
2. Don’t drop or step on the remote control unit or subject it to shocks.
3. Note that it may not be possible to operate the main unit if there are obstacles be-
tween it and the remote sensor.
4. Don’t expose the remote sensor to strong light.
Please install the battery as followings:
1. Install 8 x “size D 1.5V” batteries (not
supplied).
2. Refer to the polarity diagram in the bat-
tery compartment of the unit. Match the
marks of (+) and (-) on the diagram to the
marks of (+) and (-) on the batteries.
Note:
8 x “size D 1.5V” batteries
Battery precautions
Follow these precautions when using batter-
ies in this device:
1.
Use only the size and type of batter-
ies specified.
2. Be sure to follow the correct polarity
when installing the batteries as indi-
cated in the battery compartment.
Reversed batteries may cause dam-
age to the device.
3. Do not mix different types of batter-
ies together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to pre-
vent damage or injury from possible battery leakage.
5. Do not try to recharge batteries, which are not intended to be recharged; they can
overheat and rupture. (Follow battery manufacturer’s directions.)
6. Do not short the battery terminals.
Insert the battery