Xoro HMD 900 - Manual (Page 59)

21
Engl
ish
Basic operations
Selecting the player mode
1. When power is ON, press SOURCE button to switch from one mode to another.
The operating modes changes in the following order:
DVD > DVB-T> RADIO > AUX > DVD
Turning on/off the player
Connect the AC/DC adapter to the player of the jack marked DC13.5V, then Press POWER
button to turn on the player.
Press POWER button to turn off the player.
Playing a disc
1.
Press open button to open the CD
Compartment door.
2. Load disc with the label facing up,
and press the disc firmly onto the
center spindle.
3. Push down to close the DVD/CD
door.
4. Press MENU to display the menu list.
5. Press STOP button to stop playback.
6. Press |<< button to play the previous
track or chapter.
7. Press >>| button to play the next
track or chapter.
8. Press ||> button to pause or resume playback.
Playing DVD
Accessing the DVD root menu
Press MENU on the remote control during the playback to display the menu.
A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu
of the disc appears on the screen of your Monitor. The contents of the menu are vary from
disc to disc. Press MENU during playback to display the menu again. Some DVDs only allow
you to select disc playback options using the DVD root menu.