Xoro HMD 900 - Manual (Page 61)

23
Engl
ish
Basic operations
Stopping playback
1. Press STOP to stop playback. The unit automatically memorizes the stopping point.
2. Press PLAY to resume playback.
3. Press STOP again to fully stop playback of the disc.
Note:
•
Some kind of discs do not support the resuming of playback after first stopping.
1. Press PLAY/PAUSE to pause the playback of a disc.
2. Press PLAY/PAUSE to resume playback.
1. Press
|<< on the remote control and hold for 1.5 seconds to scan backward at 2x-4x-
8x-20x times of normal speed.
2. Press >>| on the remote control and hold for 1.5 seconds to scan forward at 2x-4x-
8x-20x times of normal speed.
Note :
•
There is no sound during fast-forward / fast-reverse.
1. Press SLOW on the remote control to start slow playback. Each pressing of this
button will after the speed to 1/2,1/3,1/4,1/5,1/6 and 1/7 of normal playback.
Note:
•
No sound during frame-by-frame playback
•
For CD/MP3, this function is not available.
1. Press REPEAT to set the starting point of a segment. The screen will show “Repeat
A-“
2. Press REPEAT again to set the stop point of a segment. The main unit will start
repeat playback of the segment from A to B.
3. Press REPEAT again to resume normal playback status.
Repeat playback of titles, chapters or tracks
1. While playback of a disc press REPEAT to select the title, chapter or track for re-
peat playback.
Pausing playback
Fast-forwarding / Fast-reversing
Slow and frame-by frame playback
Repeat playback