Xoro HMD 900 - Manual (Page 56)

18
Engl
ish
CONNECTING
Connecting with a VIDEO (CVBS) cable
The video (CVBS) cable transmits the signals for
brightness (Y-signal) and colour (C-signal) in a
combined way.
Plug a cable into the VIDEO (CVBS) socket on
the left side of your HMD 900 and uses the jack
which are marked with “OUT”. The other side of
the cable must be connected to the VIDEO input
socket of the TV-set (usually labeled “VIDEO IN”
or “AV IN”. Please also refer to your TV set’s user
manual). As VIDEO (CVBS) does not transmit
sound, you also must add an audio connection.
Insert one end of the supplied audio (Cinch [RCA])
cable into the white/red Cinch [RCA] socket L/R
AUDIO OUT at the left side of the HMD 900 and
the other end into the audio input socket (usually
white/red) on the TV set (usually labeled “AUDIO
IN” or “AV IN”. Please also refer to your TV set’s
user manual).
Switch on the TV set and select the AV input or
the respective channel number. For channel num-
ber and input selection please also refer to your
TV operating instructions.
Connecting to a TV set