Xoro HMD 900 - Manual (Page 57)

19
Engl
ish
CONNECTING
Connecting to an Amplifier
Connecting to AV amplifier by S/PDIF
This player contains a Dolby Digital or MPEG2
decoder. This enables the playback of DVD
recorded in Dolby Digital, MPEG1/2 audio or
linear PCM without an external decoder sup-
ports. When the player is connected to an AV
amplifier with 5.1 channel input connectors,
theater quality audio could be enjoyed at your
home at the time of playing disc recorded in
Dolby digital, MPEG1/2 audio or linear PCM.
The "S/PDIF" specifications allow several differ-
ent types of cables and connectors which must
match the device being used. Key words for the
electrical type are "coaxial" and "RCA jack."
The other type is called "optical" with the word
"TOSLINK" often used.
Please connect the DVD-Player with the AV
amplifier by a toslink cable and use the connec-
tor “OPTICAL” on the DVD-Player (please refer
the picture above). The second way is to con-
nect the DVD-Player with the AV amplifier by
cable which is normally marked in orange and use the orange RCA jack by the DVD-Player.
Notes:
1.
Choose right audio setting for this player according to your audio system require-
ment after connection is made.
2. If the type of the speaker connected does not satisfy the channels recorded in a
MPEG-2 or Linear PCM disc, the disc will not be played in all channels but only in 2
channels (i.e. even if the front speakers and the center speakers are connected, a
disc recorded in 5.1 channels will be played only in 2 channels.
When DVD discs recorded in DOLBY digital, MPEG audio or other formats are played, corre-
sponding bit stream is output from the player OPTICAL and COAXIAL digital audio output
connector. When the player is connected to an external decoder or a power amplifier, you
can enjoy theater-quality at your home.
Notes when connecting the optical digital cable:
Remove the protective cap from the connector, insert the plug-ins of DVD and amplifier opti-
cal slot so that the configurations of both the cable and the connector match. Keep the pro-
tective cap and always reattach the cap when not using the connector to protect against dust
and laser beam.
Caution for the coaxial/optical digital audio output connector:
Do not connect an amplifier with a Coaxial or optical digital input connector) which does not
contain the Dolby digital or MPEG audio decoder otherwise it may be harmful to your ears
and damage your speakers.