Xoro HMD 900 - Manual (Page 58)

20
Engl
ish
CONNECTING
Connecting with a VIDEO (CVBS) cable
The video (CVBS) cable transmits the signals
for brightness (Y-signal) and colour (C-signal)
in a combined way.
Plug a cable into the VIDEO (CVBS) socket on
the left side of your HMD 900 and uses the jack
which are marked with “IN”. The other side of
the cable must be connected to the VIDEO
output socket of the STB, Game Console or
DVD-Player (usually labeled “VIDEO Out” or
“AV Out”.)
As VIDEO (CVBS) does not transmit sound,
you also must add an audio connection.
Insert one end of the supplied audio (Cinch
[RCA]) cable into the white/red Cinch [RCA]
socket L/R AUDIO IN at the left side of the
HMD 900 and the other end into the audio
output socket (usually white/red) on the STB,
Game Console or DVD-Player (usually labeled
“AUDIO Out” or “AV Out”. )
Switch on the HMD 900 and press the
SOURCE button on the control field or remote
control until AUX is displayed.
Connecting to the HMD 900