IMP Pumps NMTC module - Manual (Page 22)

22
Ethernet connection topologies
Figure 5: connecting to a computer with a cross-over cable
Figure 6: connecting to a network via router
6.2 Connecting to pump ad-hoc with a cross over cable
Connecting directly to a computer
USE CROSSOVER CABLE
These instructions are made for Microsoft Windows 7. You can connect the pump using any other OS
with a set IP address when connecting directly to a computer or any other device with a web browser
when connecting via a local network.
Requirements:
• Computer with an internet browser (Chrome, Internet explorer, Firefox, Netscape, Safari,
Mosaic, Opera…) if connecting directly or device with a internet browser.
• Ethernet crossover cable or Ethernet patch cable
Setting a local IP address:
1. Open your start menu and
then your „Control Panel“