IMP Pumps NMTC module - Manual (Page 27)

27
4. Connect your computer to the NMT pump, as described previous chapter.
5. Open your network page on
the pump and type in the first
three set of numbers of your ip
address that you got on the last
slide under „Pump IP address“
and press save.
6. Connect the pump and router with an Ethernet patch cable
7. Open your web browser
9. Type „nmtpump/“* in your
address bar**
10. You are now connected to
the pump
*or „192.168.0.245/“
**If connecting to a duplex
pump the right pumps has
„nmtpump/“(„or
192.168.0.245/“) and the left
„nmtpump2/“(„ or
192.168.0.246/“)
6.4 Pump configuration over Ethernet
Monitor and adjust the NMT pump via the web pages
When you are connected to the pump and enter the settings page you see that it has 5 subpages:
• Overview
• Pump
• Network
• Log
• Help
Change according to your
network configuration