IMP Pumps NMTC module - Manual (Page 9)

9
3.2 Connecting the module wiring
Opening the cover
WARNING!
Before performing any work on
the module, make sure that the
pump and module electricity
supply has been switched off and
that it cannot be accidently
switched on.
1) Press two top hooks on the display
panel. Use flat tip screwdriver if
needed.
2) Simultaneously pull display panel away
from the pump.
3) Disconnect display panel cable to ease
access to the module wiring. Wiring can
now be connected.
1.
1.
2.
3.