IMP Pumps NMTC module - Manual (Page 26)

26
10. Type „nmtpump/“* in your
address bar**
11. You are now connected to
the pump
*or „192.168.0.245/“
**If connecting to a duplex pump
the right pumps has
„nmtpump/“(„or
192.168.0.245/“) and the left
„nmtpump2/“(„ or
192.168.0.246/“)
6.3 Connecting to pump via router
Connecting via a router
Requirements:
• Ethernet patch cable
• Device with an internet browser that can connect to a local network (computer, mobile
phone…)
• Router
1. Connect your computer with your router.
Open your command line by typing cmd in windows search.
2. Then type „ipconfig“ in to the
command line
3. Look for IPV4 Address under
the network adapter that you
are currently using(wireless or
wired)