ABUS TVIP72500 User Manual
Page 105
105
Passive mode:
Enable this function if the FTP server was configured in passive mode.
Test:
When this button is pressed, the FTP server settings are tested. A test file is
uploaded to the FTP server
SMTP:
SMTP server address:
Enter the address of the outgoing e-mail server here (SMTP server).
Server port:
The standard SMTP server port is 25. An alternative port can be assigned if
required.
SSL:
If the e-mail server uses SSL, it can be enabled here.
Authentication:
Define the authentication type for the e-mail account here.
SMTP:
If authentication on the e-mail server requires a user name and password, this
option must be enabled.
POP before SMTP:
Select this option if e-mails must be retrieved before e-mails can be sent. It may
be possible to delete “POP before SMTP” in the e-mail account settings.
E-mail sender:
This is the address of the e-mail account. The maximum length is 64 characters.
E-mail recipient:
The e-mail address of the recipient. The maximum length is 64 characters.
Test:
When this button is pressed, the SMTP server settings are tested. A test file is
sent to the e-mail recipient.
HTTP:
Use this function to save image data (individual images) on an HTTP server. A CGI script on the HTTP server
must be able to receive the data. In the event of questions, please contact your network administrator.
URL:
Enter the URL of the HTTP server (e.g. “192.168.0.156/cgi-bin/webcam”).
Port:
Enter the port on which the HTTP server operates.
User ID:
User ID on the HTTP server
Password:
Password on the HTTP server
Repeat password:
Reenter the password here.
Proxy address:
Server name when a proxy server is used
Proxy port number:
Port number of the proxy server
Proxy user name:
User ID on the proxy server
Proxy password:
Password on the proxy server
Test:
When this button is pressed, the HTTP server settings are tested. A test file is
sent to the HTTP server.
Network drive:
Type:
Protocol selection between the Windows network (SMB/CIFS) or UNIX network
(NFS)
Windows network (SMB/CIFS)
Network storage capacity:
Entry of the IP or drive/folder of the network drive
Ex.: \\IP\Folder
Ex.: \\my_nas:\Folder name
Workgroup:
Workgroup of the Windows network drive
User name:
User name of the workgroup.
Password:
Password of the workgroup.
Repeat password:
Reenter the password for the workgroup here.
Create folder:
An additional subfolder is created on the network drive.
Test:
When this button is pressed, the network drive settings are tested. A test file is
sent to the network drive.
Unix network drive (NFS):