ABUS TVIP72500 User Manual
Page 89
89
3GPP
Image size:
Select between the following image resolutions (pixels):
TVIP71501, TVIP71551: 1280x720, 640x480, 320x240, 160x120
TVIP72500: 1920x1080, 1280x1024, 1280x960, 1280x720,1024x768,
640x480, 320x240
Frame rate:
Specifies the frame rate in frames per second.
Quality:
Setting for the quality of the video stream.
Fixed quality:
The video quality is fixed at a certain level. The network bandwidth
requirements can rise or fall according to demand.
Fixed bit rate:
The bit rate of the video stream is set to a certain fixed value. The video quality
can vary according to the level of activity.
Accept the settings by pressing “SAVE” or cancel them by pressing “Cancel”.
Advanced
Image improvements
Video display:
You can call up a preview video by pressing the “Video” button. This is helpful
for configuring the following image settings on this page.
Brightness:
Image brightness settings
Saturation:
Image saturation settings
Contrast:
Image contrast settings
Sharpness:
Image sharpness settings. A higher sharpness value can increase image noise.
You can reset the four image settings back to the factory settings by pressing
the “Standard” button.
White balance
Color hue:
You can adjust the basic settings for the color hue here. The colors will be
shown warmer or cooler according to the settings.
White balance:
Select the corresponding lighting conditions where the cameras are installed.
Exposure settings
Exposure frequency:
Auto: Automatic regulation of the exposure frequency
50: Fixed setting at 50 Hz network frequency
60: Fixed setting at 60 Hz network frequency
Fixed: The setting for the exposure frequency is determined and saved when
the settings are saved.
Automatic exposure:
Specifies the upper limit for automatic exposure.
Slow shutter:
On: Setting for a long exposure time in night mode. This results in a brighter
image in case of poor lighting conditions and is accompanied by a lower frame
rate.
Off: Setting for a normal exposure time in night mode.
Backlight compensation:
When this box is checked, the backlight compensation is activated. When this
function is activated, the display of objects in front of bright backgrounds is
improved.