Alpha Technologies FlexNet PMR, GMR Series - Manual (Page 35)

031-239-C0-003 Rev C 35
Fig. 4-3, Battery Installation for PMR Series
(Standard Battery Cable Kit Shown)
48V
4A
Red
1/2" Knockouts
Wire tie locations
Optional AlphaCell
50Ah 85GXL Batteries
Optional Battery
Retainer Bar
36V 24V 12V
3A 2A 1A
Black
RTS probe
Fuse
3/4" Knockouts
To install AlphaCell gel batteries, place the batteries (on their side) into the bottom of the enclosure with the
positive terminal facing UP, and connect the battery cable kit as shown. For detailed instructions, refer to the
instruction sheet that accompanies the Battery Cable Kit.
4.0 Equipping the System, continued
4.2 Batteries, continued
4.2.1 PMR Batteries
Batteries are placed on the fl oor of the enclosure and connected in accordance with
the accompanying Battery Cable Kit instruction sheet.
NOTE: