Alpha Technologies FlexNet PMR, GMR Series - Manual (Page 36)

36
031-239-C0-003 Rev C
Fig. 4-4, Battery Installation for GMR Series
Rear View, Doors and Lid Removed
To install AlphaCell gel batteries, place the batteries (on their side) into the bottom of the enclosure with the
positive terminal facing UP, and connect the battery cable kit as shown in Fig. 4-3. For detailed instructions,
refer to the instruction sheet that accompanies the Battery Cable Kit.
4.0 Equipping the System, continued
4.2 Batteries, continued
4.2.2 GMR Batteries
Batteries are placed on the fl oor of the enclosure and connected in accordance with
the accompanying Battery Cable Kit instruction sheet.
NOTE: