Alpha Technologies FlexNet PMR, GMR Series - Manual (Page 48)

48
031-239-C0-003 Rev C
4.0 Equipping the System, continued
4.9 Optional Form C Alarm Panel Installation, continued
4.9.1 Mounting and Wiring the Alarm Panel
Fasten the panel to the rack using the screws
supplied with the rack system.
Make the following connections from the front
of the alarm panel to the front panel of the
ELPM, using the appropriate wires from the
wire kit. See Fig. 4-26 for details.
1.
2.
Fig. 4-26, Attach panel to rack
From Alarm Panel To ELPM Power Supply
Line Sense AC Power
To ELPM Alarm Status monitoring connector
To ELPM Output Output
Table 4-1, Connections for Alarm Panel
Fig. 4-27, Wiring the Alarm Panel
Complete the VOut and Alarm connections (see Fig. 4-24) to your monitoring
equipment. 3.
To AC Power
To Status Monitoring Connector
To ELPM Output
Form C Alarm Panel
ELPM Power Supply
To Customer Equipment