Alpha Technologies XM3-HP Series - Technical Manual - Manual (Page 77)

77 017-882-B0-001 Rev. C2 (10/2013)
3.0
Operation
3.4.2 Applications, continued
3.4 AlphaAPPs Overview, continued
The top line of the Utility Performance sub-menu does not scroll. It indicates “OK” if there are
no utility events active or “EVT” if there are.
Pressing the down arrow scrolls the sub-menu to show SAGS, SURGES and FREQUENCY
sub-menu selections. Each of these sub-menus has the same structure as the OUTAGES
sub-menu, so only OUTAGES will be shown here.
Press ENTR to select OUTAGES sub-menu (top left). This screen will appear if an Outage is
in progress (top right), otherwise the screen below it will appear.
If any previous outages have been logged, the ENTR key will appear and the first character
in OUTAGE will flash. Pressing ENTR displays the Outage Log.
Pressing the up and down arrows displays the various log entries. The last complete Outage
logged will be displayed first. Press the down arrow to review earlier log entries.
OUTAGE IN PROGRESS
START TIME
23:52
DURATION 12M 13S
ESC
OUTAGE LOG
DATE/TIME/DURATION
03/19/11 22:35 99M
ESC
OUTAGE 24 HR HISTORY
EVENTS 2 AVG 2M
MIN 1M MAX 3M
ESC
O UTAGE TOTAL HISTORY
EVENTS 2 = 2
MIN 1M MAX 3M
ENTR ESC
3.0 Operation, continued
If Outage is in Progress
If no Outage
is in Progress