Atec Agilent-1670G - Manual (Page 18)

18
Agilent Probing Solutions
Package type Pin Pitch Elastomeric Solutions
304-pin PQFP/CQFP 0.5 mm
240-pin PQFP/CQFP 0.5 mm E5363A probe adapter
E5371A 1/4-flexible adapter
208-pin PQFP/CQFP 0.5 mm E5374A probe adapter
E5371A 1/4-flexible adapter
184-pin PQFP/CQFP 0.5 mm
176-pin PQFP 0.5 mm E5348A probe adapter
E5349A 1/4-flexible adapter
160-pin QFP 0.5 mm E5377A probe adapter
E5349A 1/4-flexible adapter
160-pin PQFP/CQFP 0.65 mm E5373A probe adapter
E5349A 1/4-flexible adapter
144-pin PQFP/CQFP 0.65 mm E5361A probe adapter
E5340A 1/4-flexible adapter
144-pin TQFP 0.5 mm E5336A probe adapter
E5340A 1/4 flexible adapter
Figure 20. Elastomeric Probing Solution
Analysis Probes for Specific Processors and Buses
Please see Processor and Bus Support for Agilent Logic Analyzers
(pub. no. 5966-4365E) for detailed information and ordering
instructions for analysis probes. Also, see Probing Solutions for
Agilent Logic Analysis Systems (pub. no. 5968-4632E) for more
information on probing.
Figure 21. High-Density Direct Connection Solution Figure 22. Normal-Density Direct
Connection Solution
Agilent E5346A
high-density
adapter cable
Probe cables
from logic
analyzer
Mictor (Agilent
part number
E5346-68701)
Optional shroud
(Agilent part number
E5346-44701)
Internal RC
network
Probe cables
from logic
analyzer
Termination
adapter (Agilent
part number
01650-63203)
20-pin connector
(Agilent part number
1251-8106 2 x 10 pin
header with 0.1” x
0.1” spacing)