Atec Agilent-1670G - Manual (Page 3)

3
Agilent Technologies 1670G Series Annotated Screen Shots
Figure 4. Configuration Screen
Figure 5. Format Screen
Run—starts data acquisition in
specified trace mode.
Stop—halts acquisition and dis-
plays current data.
Acquisition mode and number of
channels (assign pods) are speci-
fied. Timing and State measure-
ments can be taken
simultaneously.
Activity indicators allow users to
monitor device-under-test activity
during analyzer setup.
User mnemonics defined (for bit
patterns or ranges), or up to 1000
symbols extracted from popular
object module formats. In symbol
mode, symbols will be dis-played
in place of data.
Logic threshold levels.
State speed can be specified
when analyzer is in state mode.
Full channel (250 MHz) or half
channel (500 MHz) can be speci-
fied in timing mode. (Screen shot
is in state mode.)
Activity indicators.
Appropriate channels assigned to
a label.
Channels can be grouped and
given a 6-character label.
Maximum of 126 labels with up to
32 channels each.