B&K Precision 889B - Manual - Manual (Page 34)

33
6. Safety Precaution
SAFETY CONSIDERATIONS
The Models 889B LCR Meter has been designed and tested according to Class 1A 1B or 2 according to
IEC479-1 and IEC 721-3-3, Safety requirement for Electronic Measuring Apparatus.
SAFETY PRECAUTIONS/SAFETY NOTES
The following general safety precautions must be observed during all phases of operation, service, and repair of
this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of the instrument.
The manufacturer assumes no liability for the customer‘s failure to comply with these requirements.
BEFORE APPLYING POWER
!
Verify that the product is set to match the available line voltage is installed.
SAFETY SYMBOLS
Caution, risk of electric shock
Earth ground symbol
Equipment protected throughout by double insulation or
reinforced insulation
!
Caution (refer to accompanying documents)
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT
Because of the danger of introducing additional hazards, do not install substitute parts or perform any
unauthorized modification to the instrument. Return the instrument to a qualified dealer for service and repair to
ensure that safety features are maintained.
INSTRUMENTS WHICH APPEAR DAMAGED OR DEFECTIVE SHOULD NOT BE USED! PLEASE
CONTACT B&K PRECISION CORP. INCORPORATED FOR INFORMATION ON REPAIRS.