B&K Precision 886 - Manual - Manual (Page 28)

25
2.2.4 Display Speed
The Models 885 & 886 provides two different display speeds
(Fast/Slow). It is controlled by the Speed key. When the speed is set
to fast, the display will update 4.5 readings every second. When the
speed is set to slow, it’s only 2.5 readings per second.
2.2.5 Relative Mode
The relative mode lets the user to make quick sort of a bunch of
components. First, insert the standard value component to get the
standard value reading. (Approximately 5 seconds in Fast Mode to
get a stable reading.) Then, press the Relative key, the primary
display will reset to zero. Remove the standard value component
and insert the unknown component, the LCD will show the value
that is the difference between the standard value and unknown
value.
2.2.6 Range Hold
To set the range hold, insert a standard component in that
measurement range. (Approximately 5 seconds in Fast Mode to get
a stable reading.) Then, by pressing the Range Hold key it will hold
the range within 0.5 to 2 times of the current measurement range.
When the Range Hold is press the LCD display: