B&K Precision 886 - Manual - Manual (Page 30)

27
shows some examples of capacitance measurement:
The testing level and frequency can by selected by pressing the
Level key and Frequency key, respectively.
2.2.10 Inductance Measurement
Select the L/C/Z/DCR key to Ls or Lp mode for measuring the
inductance in serial mode or parallel mode. If the serial mode (Ls) is
selected, the D, Q and ESR can be shown on the secondary display.
If the parallel mode (Lp) is selected, only the D and Q can be shown
on the secondary display. The following shows some examples of
capacitance measurement:
The testing level and frequency can by selected by pressing the
Level key and Frequency key, respectively.