Dialight D564-A13-001 Vigilant L864 LED Based Red Medium Intensity Beacon User Manual
Page 8
Document No.
9100-127-1733-99 Rev A
June 19, 2013
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
8 of 14
NOTE: The only parts that are serviceable on the Beacon are the Replacement
Lamp and Power Supply.
Procedure for Installing the Replacement Lamp
Step 1 WARNING: Power to the Beacon must be removed prior to servicing.
Step 2 Unclamp the two latches holding the lamp down.
Step 3
Rotate the lamp back to its open position.
Step 4
Disconnect the line and neutral wires from the terminal block, and than
unscrew the grounding strap from the lamp to the base. Be careful not to
lose the screw for the ground strap.
Terminal Block
Ground Strap