Dialight D1RW-C13-008 Vigilant L864 / L865 LED Based Dual Red / White Beacon - Manual (Page 12)

Document No.
9100-127-1354-99 Rev B
Release Date: 10/7/2010
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 12 of 25
Section 8: Configuration Option Switches
CONFIGURATION SWITCH SETTINGS (on Microcontroller Board)
ON OFF
1. White at night Red at night
2. Not USED Keep in OFF position
3. Relays pulse while system is OK Relays do not pulse
4. Relays open on fault Relays close on fault
Section 9: Configuration Via Serial Port
Certain parameters may be configured via a serial port on the microcontroller
board. This allows different pulse times and duty cycles to be set up, as well as
allowing for additional monitoring capabilities. See Section 18 for more
information about the connection and protocol.
1 2 3 4
ON