Dialight D1RW-C13-008 Vigilant L864 / L865 LED Based Dual Red / White Beacon User Manual
Page 5
Document No.
9100-127-1354-99 Rev B
Release Date: 10/7/2010
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 5 of 25
Section 2: Installation and Wiring
The Driver module should be mounted inside a grounded, metal enclosure to
provide environmental, electromagnetic interference and safety protection.
For safety, an interlock switch should be fitted to the Controller cabinet door such
that when opened, power is disconnected from the system.
A multi-conductor cable needs to be provided to connect the Driver to the Flash
Head.
SYSTEM BLOCK DIAGRAM
Multi-way connection
cable
Flash
Head
Power In
Enclosure/Cabinet
Alarm
Outputs
Control
Signals