I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera - Manual (Page 14)

14
Chapter 2: Installation
2-5. Product with Ceiling Mount Installation
2-5-1. Ceiling Mount Model: BCO-27L
 BCO-27L Dimension
 Installation Procedure:
Please follow the steps below to install the BCO-27L and speed dome.
Step 1: Tear off the anti-shake tap and cover from the camera lens.
Step 2: Remove the camera cover inner protection stuff, and install the camera
cover with the speed dome by tightening up the screws.
Step 3: Organize the required cables from the ceiling, and run through the
cables to the BCO-27L pipe.
Step 4: Install the BCO-27L with ceiling by the screws, and make sure the
BWC-27L is firm enough with the ceiling.
Step 5: Install the Safety-wire with BCO-27L and speed dome by the screws.
Step 6: Connect all the required cables from BCO27L and speed dome.
Step 7: Install the speed dome with BCO-27L by tightening up the screws.
Step 8: remove the camera cover protection plastics.