I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera - Manual (Page 15)

15
Chapter 3: Operation
2-6-1. Wall Mount Model: BWO-27S
2-6-2.1 BWO-27S Dimension
2-6-2.2 Installation Procedure:
Please follow the steps below to install the BWO-27S and speed dome.
Step 1: Tear off the anti-shake tap and cover from the camera lens.
Step 2: Remove the camera cover inner protection stuff, and install the
camera cover with the speed dome by tightening up the screws.
Step 3: Organize the required cables from the ceiling through
the cables
to the BWO-27S pipe.
Step 4: Install the BWO-27S with ceiling by the screws, and make sure
the BWO-27S is firm enough with the ceiling.
Step 5: Install the Safety-wire with BWO-27S and speed dome by the
screws.
Step 6: Connect all the required cables from BWO-27S and speed
dome.
Step 7: Install the speed dome with BWO-27S by tightening up the screws.
Step 8: remove the camera cover protection plastics.