I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera - Manual (Page 27)

27
Chapter 3: Operation
ON: Enable Proportion.
OFF: Disable Proportion.

<ACTIVATION: ON/OFF>
When dome is running tour/scan mode, if joystick is operate once, the program will be
hold and resume later on. But if joystick is operate more than once the program will
be cenacle itself.
ON: Enable Activation.
OFF: Disable Activation.

<HOME POSITION: ON/OFF>
When FastCam III is in idol of amount of time (user can define how many minutes),
the camera will return to home position.
ON: Enable home position.
OFF: Disable home position.

<MANUAL SPEED: 5～360 >
Manual Speed allows the user to define how fast the dome will rotate. By leaning left to
decrease or leaning right to increase the speed. User may set up to 360 degree of the fastest,
or else the number will cycle again to the slowest 5 degree.

<SCAN SPEED: 1～90 >
Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan
speed is adjustable from 1 to 90 degrees per second through the programming menu. By
leaning left to decrease or leaning right to increase the speed. User may set up to 90 degree of
the fastest, or else the number will cycle again to the slowest 1 degree.

<TOUR SPEED: 5～360 >
User may define the speed of Tour Mode, the numbers are represent moving degrees, by
leaning left to decrease or leaning right to increase the speed. User may set up to 360 degree
of the fastest, or else the number will cycle again to the slowest 5 degree.