I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera - Manual (Page 35)

35
Chapter 3: Operation
D. <RECOVERY SETUP>

<RECOVERY SETUP>
DELETE PRESETS
Delete all the presets
DEFAULT SETTINGS
Restore all settings to default of Speed Dome.
RESET CAMERA
Use this function to reset all settings of camera module to factory default.
REBOOT DOME
Reboot the system if it is not operating or if there is no control. Rebooting the system
will cycle dome and camera power without changing programmed dome settings.
RECOVERY SETUP
DELETE PRESETS OK
DEFAULT SETTING
RESET CAMERA
REBOOT DOME
BACK
EXIT
SETUP MENU
SYSTEM SETUP
DISPLAY SETUP
PARAMETER SETUP
RECOVERY SETUP
OTHERS SETUP
EXECUTION MENU
EXIT