Chapter 3: operation – I-View FDMO-36XIR/27XIR/22XIR/18XIR Outdoor IR Speed Dome Camera User Manual
Page 29
![background image](/manuals/322149/29/background.png)
29
Chapter 3: Operation
3.
<TITLE EDIT>
<PRESET/CAM: CAMERA/PRE001~008>
To edit each label, select the label to edit, lean down joystick to <TITLE EDIT>.
<TITLE EDIT:>
The Camera and Preset Position can be marked separately. For each label, max 16 characters can
be edited, including the space.
The edit label will be showing on the bottom, below the label “ I ” means which character will be
edit, move the joystick to highlight “ I “, once the “ I “ is flashing lean left or right to
the character wish to edit, then move joystick to the top to select what character to replace/add. To
add a space in between characters, move joystick to let “ SPACE “ flashing and lean right to add.
Same instruction as “ RESET “.
TITLE EDIT
PRESET/CAM: CAMERA/PRE001~128
TITLE EDIT:
BACK
EXIT
DISPLAY:
CAM001
CAMERA SETUP
CAMERA SETUP
MOTION SETUP
TITLE EDIT
TOUR EDIT
SCAN EDIT
PATTERN EDIT
MASK EDIT
POWER ON:SCAN
BACK
EXIT